概述 Outline 本系列為交流異步電動機與方箱齒輪組合為一體的減速電動機,適用于低速傳動裝置中作為驅動元件能起到簡化機械結構,降低成本和降低能耗的作用。 本系列電機可以達到某一固定的低轉速(YYJ、YSJ電機),也可以達到無級調整的變速要求(YYJT電機),另外本系列電機均可根據用戶要求做成制動電機,以提高其生產效率。 This series gearmotor consist of square gearbox and AC indution motor,suitable to use as driving element on low speed transmission units. This series of motor can run at a fixed low speed(YYJ,YSJ motor),also can run on the stepless speed-regulating requirement, Brake motor can be made on the basis of this series of motor according to customers′ requirement for improving its production efficiency.
產品型號說明 Model Number explanation:

使用環境條件 Usage:
●海拔不超過1000米;No more than 1000m above sea level. ●環境溫度應在-15℃~+40℃的范圍內;Ambient temperature: -15℃-40℃ ●環境相對濕度<90%(25℃) Relative humidity:<90%(25℃).
單相電容運轉異步電機技術參數 Parameters of phase capacitor-running gearmotor
型號 model |
功率 pwer W |
電壓 voltage V |
頻率 frequency HZ |
電流 current A |
啟動轉矩 starting torque mN.m(g.cm) |
額定轉矩 reted torque mN.m(g.cm) |
額定轉速ratedspeed r/min |
電容 capacitor μf/v AC |
YY60-6 |
6 |
110 |
50 |
0.3 |
33(337.5) |
45.8(468) |
1250 |
3/250 |
YY70-10 |
10 |
0.35 |
64.7(660) |
76.4(780) |
4/250 |
YY70-15 |
15 |
0.42 |
98(1000) |
114.6(1170) |
6/250 |
YY80-25 |
25 |
0.65 |
108(1100) |
191(1950) |
7/250 |
YY90-40 |
40 |
0.70 |
215(2200) |
294(3000) |
1300 |
12/250 |
YY90-60 |
60 |
1.2 |
343(3500) |
441(4500) |
14/250 |
YY90-90 |
90 |
1.7 |
490(5000) |
662(6750) |
25/250 |
YY100-120 |
120 |
2.3 |
686(7000) |
882(9000) |
30/250 |
YY100-150 |
150 |
3.0 |
730(7446) |
1061(10822) |
1350 |
30/250 |
YY100-180 |
180 |
3.5 |
980(10000) |
1274(13000) |
30/250 |
YY60-6 |
6 |
220 |
50 |
0.15 |
33(337.5) |
45.8(468) |
1250 |
0.5/450 |
YY70-10 |
10 |
0.16 |
64.7(660) |
76.4(780) |
1/450 |
YY70-15 |
15 |
0.20 |
98(1000) |
114.6(1170) |
1.5/450 |
YY80-25 |
25 |
0.35 |
108(1100) |
191(1950) |
2/450 |
YY90-40 |
40 |
0.45 |
215(2200) |
294(3000) |
1300 |
3/450 |
YY90-60 |
60 |
0.60 |
343(3500) |
441(4500) |
4/450 |
YY90-90 |
90 |
1.0 |
490(5000) |
662(6750) |
6/450 |
YY100-120 |
120 |
1.2 |
686(7000) |
882(9000) |
8/450 |
YY100-150 |
150 |
1.5 |
730(7446) |
1061(10822) |
1350 |
8/450 |
YY100-180 |
180 |
1.7 |
980(10000) |
1274(13000) |
10/450 |
接線圖 Wiring diagram

三相交流異步電機技術參數 parameters of 3 phases AC motor
型號 model |
功率 power W |
電壓 voltage V |
頻率 frequency HZ |
電流 current A |
啟動轉矩 starting torque mN.m(g.cm) |
額定轉矩 rated torque mN.m(g.cm)
|
額定轉速 rated speed r/min |
YS60-6 |
6 |
380 |
50 |
0.09 |
154(1575) |
44(450) |
1250 |
YS70-10 |
10 |
0.11 |
162(1650) |
73.5(750) |
YS70-15 |
15 |
0.15 |
260(4180) |
118(1200) |
YS80-25 |
25 |
0.18 |
420(4290) |
191(1950) |
YS90-40 |
40 |
0.21 |
647(6610) |
294(3000) |
1300 |
YS90-60 |
60 |
0.25 |
970(9900) |
441(4500) |
YS90-90 |
90 |
0.32 |
1454(14850) |
662(6750) |
YS100-120 |
120 |
0.5 |
1940(19810) |
882(9000) |
YS100-140 |
140 |
0.6 |
2264(23120) |
1029(10500) |
YS100-180 |
180 |
0.65 |
2800(28600) |
1274(13000) |
1350 |
根據客戶需要我公司也可生產三相220V上述功率電機。 we also can manufacture the above -mentioned power 220V 3phase motor accordint to the requirements of customer.
接線圖 wiring diagram 調換任意兩相接線即可改變電機旋轉方向。 To be reversed any two wire can be changed motor direction




減速器允許的最大轉矩 max.torque permissible of gearbox
點擊查看詳細參數
注: 1、超出上述減速比可專門設計、加工、訂貨。 2、為避免減速器因過載而損壞,在選用低轉速時轉矩不得超過表中規定值。 3、在輸出軸上安裝聯軸器、皮帶輪等零件時,不可用力敲擊、用力壓入、防止損壞齒輪箱內部零件。 Note: 1.The motor in excess of theabove-mentioned ratio may be specially designed, manufactured and ordered. 2.The torque must be within the rated &#118alue of the table when selecting the low speed motor for preventing damage from over-olading 3.Please do not heavily knock when installing coupling. belt wheel,etc.to output shaft of motor.
齒輪減速電機的外形及安裝尺寸 outline & installation dimeasion

型號model |
速比ratio |
L1 |
L |
70YY(YS)J-10 |
1:3-1:18 |
30 |
80 |
70YY(YS)J-15 |
1:3-1:20 |
32 |
86 |
70YY(YS)J-10 |
1:20-1:180 |
39 |
|
70YY(YS)J-15 |
1:25-1300 |
45 |
86 |

型號model |
速比ratio |
L1 |
L2 |
80YY(YS)J-10 |
1:3-1:30 |
35 |
90 |
80YY(YS)J-15 |
105 |
80YY(YS)J-10 |
1:50-1:300 |
54 |
90 |
80YY(YS)J-15 |
105 |

型號model |
速比ratio |
L1 |
L2 |
90YY(YS)J-60 |
1:3-1:20 |
40 |
106 |
90YY(YS)J-90 |
120 |
90YY(YS)J-120 |
162 |
90YY(YS)J-60 |
1:25-1:300 |
65 |
106 |
90YY(YS)J-90 |
120 |
90YY(YS)J-120 |
162 |

型號model |
速比ratio |
L1 |
L2 |
100YY(YS)J-120F |
1:3-1:20 |
41 |
155 |
100YY(YS)J-150F |
163 |
100YY(YS)J-120F |
1:25-1:300 |
70 |
155 |
100YY(YS)J-140F |
163 |
100YY(YS)J-180F |
163 |


型號model |
速比ratio |
L |
90YY(YS)J-90 |
1:25-1:300 |
120 |
90YY(YS)J-120 |
1:25-1:300 |
162 |
調速電機參數 the parameters of speed-regulating motor
型號 model
|
功率 power W
|
電壓 voltage V
|
頻率 frequency HZ
|
調速范圍 speed-regulating range r/min |
速度穩定率 spped stability rate %
|
額定轉矩mN.m(g.cm) rated torque |
啟動轉矩 mN.m(g.cm) starting torque
|
電容 μf/v AC capacitor |
90r/min |
120r/min |
YYJT60-6 |
6 |
200 |
50 |
90-1400 |
5 (參數值) (parameters) |
24 |
45.8 |
35 |
0.5/450 |
YYJT70-10 |
10 |
30 |
80 |
64.7 |
1/450 |
YYJT70-15 |
15 |
35 |
90 |
98 |
1.5/450 |
YYJT80-25 |
25 |
45 |
150 |
108 |
2/450 |
YYJT90-40 |
40 |
60 |
1250 |
215 |
3/450 |
YYJT90-60 |
60 |
100 |
420 |
343 |
4/450 |
YYJT90-90 |
90 |
120 |
600 |
490 |
6/450 |
YYJT100-120 |
120 |
150 |
850 |
686 |
8/450 |
YYJT100-140 |
140 |
160 |
1000 |
784 |
8/450 |
YYJT100-180 |
180 |
190 |
1270 |
980 |
10/450 |
US型調速控制器 seres US speed controller
性能及主要數據 performance and main data
輸入電壓 input voltage |
AC 220V ±10% |
電源頻率 power supply frequency |
50Hz |
運轉方式 running mode |
VR調制式 VR plate plug-in type |
調速范圍 speed-regulating range |
50Hz, 90-1400r/min |
工作環境溫度 ambient temperature |
-10℃-50℃ |
配套電機功率W power of the motor fitted W |
15 |
25 |
40 |
60 |
90 |
120 |
140 |
180 |
電容 μf/450V capacitor μf/450V |
1.5 |
2 |
3 |
4 |
6 |
8 |
8 |
10 |

注意事項 Caution: 1、插接件接線,請勿任意修改; 2、使用時請先將速度設定旋鈕調到“0”,避免瞬間大電流損壞調速器; 3、變更電動機旋轉方向時,須等電動機停止運轉后,方可改變; 4、動作形狀只控制電動機動作或停止,勿作中斷電源之用。 5、長時間不用時,請斷開電源; 6、請勿在有腐蝕性氣體、易燃易爆的環境中使用。 1.please don`t make any change when wiring 2.please set the speed button to zero before starting for preventing from the damagre of the large current 3.reverse the motor rotation direction after motor stopped 4.On-off button only control motor running or stop, please do not use for cutting off the power supply 5.please cut off the power supply when not to be used during a long time 6.please do not use in the corrosion gas, inflammable or explosive environments |